Specifications
| IEC Class 1(FDA Class II) Type | CD4-30 | CD4-85 | CD4-350 | |
| High power Class 3R Type | CD4-30-3R | CD4-85-3R | CD4-350-3R | |
| Measuring Range | 30+/-5mm | 85+/-20mm | 350+/-100mm | |
| Light Source | (Regular Type) | Class 2 (IEC/JIS) Class II (FDA) Red Laser Diode, 650nm, Max 1mW | ||
| (High Power Type) | Class 3R (IEC/JIS) Class IIIa (FDA) Red Laser Diode, 650nm, Max 5mW | |||
| Spot Size (see Remark 1) | 30 × 100μm | 70 × 290μm | 300 × 700μm | |
| Linearity (see Remark 2) | ±0.1%FS | |||
| Resolution (see Remark 3) | 1μm | 3μm | 40μm | |
| Power Supply | supplied by CD4A-N/P Controller | |||
| Temperature Drift | ±0.01% FS/ , F° |
|||
| Laser Emission LED | Green = Laser emission | |||
| Measurement LED | Red = In range, 5% closer than center of measurement range (0 to 45%) Orange = Within +/- 5% of the center of the measurement range Green = In range, 5% farther than center of measurement range (55 to 100%) Red/Green alternating = Out of measurement range |
|||
| Environmental Rating | IP67 | |||
| Operation Temperature / Humidity | -10 to 45 (14 to 113F°), 35 to 85% RH |
|||
| Storage Temperature / Humidity | -20 to 60 (-4 to 140F°), 35 to 85% RH |
|||
| Ambient illuminance | Incandescent Lamp = Max. 3,000 lux | |||
| Vibration Resistance | 10 to 55 Hz double amplitude 1.5mm for XYZ | |||
| Shock Resistance | 50G (500m/s2) | |||
| Cable | 50cm (19.7 inch) cable | |||
| Cable Extension | CD4CN-S-ROBOT (2m, 78 inch), CD4CN-5S-ROBOT (5m, 197 inch) | |||
| Material | Aluminum die-cast | |||
| *1 | Defined with center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. |
| *2 | 256 times in average (using the special amplifier), object: White Ceramic. The value depends on objects. |
| *3 | The typical value in the conditions of
256 times in average (using the special amplifier), object: White
Ceramic, distance range: Middle. The value depends on objects. |
| Product Type | CD4-L25 |
| Measuring Range | 25+/-1mm |
| Light Source | Class 1 (IEC/JIS) Class II (FDA) Red Laser Diode, 650nm, Max 0.39mW |
| Spot Size (see Remark 1) | 25 × 35μm |
| Linearity (see Remark 2) | ±0.1%FS |
| Resolution (see Remark 3) | 0.1μm |
| Power Supply | supplied by CD4A-LN/LP Controller |
| Temperature Drift | ±0.01% FS/ , F° |
| Laser Emission LED | Green = Laser emission |
| Measurement LED | Red = In range, 5% closer than center of measurement range (0 to 45%) Orange = Within +/- 5% of the center of the measurement range Green = In range, 5% farther than center of measurement range (55 to 100%) Red/Green alternating = Out of measurement range |
| Environmental Rating | IP67 |
| Operation Temperature / Humidity | -10 to 45 (14 to 113F°), 35 to 85% RH |
| Storage Temperature / Humidity | -20 to 60 (-4 to 140F°), 35 to 85% RH |
| Ambient illuminance | Incandescent Lamp = Max. 3,000 lux |
| Vibration Resistance | 10 to 55 Hz double amplitude 1.5mm for XYZ |
| Shock Resistance | 50G (500m/s2) |
| Cable | 50cm (19.7 inch) cable |
| Cable Extension | CD4CN-S-ROBOT (2m, 78 inch), CD4CN-5S-ROBOT (5m, 197 inch) |
| Material | Aluminum die-cast |
| *1 | Defined with center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. |
| *2 | 256 times in average (using the special amplifier), object: White Ceramic. The value depends on objects. |
| *3 | The typical value in the conditions of
256 times in average (using the special amplifier), object: White
Ceramic, distance range: Middle. The value depends on objects. |
| Model | CD4A-N, CD4A-LN (NPN output type) | CD4A-P, CD4A-LP (PNP output type) | |
| Number of connectable sensor heads | Max. 2pcs | ||
| Sampling frequency | 100μs | ||
| Supply voltage | 12 to 24VDC ±10% | ||
| Power consumption | 270 mA/24V (When connected 2 sensor heads, with analog current output) | ||
| Temperature drift | ±0.01% FS/ |
||
| Analog output | ANG(V) [A][B] | Voltage output ±5V/FS (Output impedance 100 Ω, resolution 1mV) | |
| ANG(mA) [A][B] | Current output 4 to 20 mA/FS (Load impedance 300 Ω, resolution 1.5μA) | ||
| Alarm output | ALM A, ALM B | NPN open collector | PNP open collector |
| Max. 100mA / DC24V (residual voltage Max. 1.8V) | |||
| Turn ON then the sensor head fails in measurement | |||
| Control output | JDGE 1 to 5 | NPN open collector | PNP open collector |
| Max. 100mA / DC24V (residual voltage Max. 1.8V) | |||
| HI/LO setting and Hysteresis setting are available for each output. | |||
| Bank input | BANK 0 to 2 | ON when connected to GND | ON when connected to 12 to 24V |
| 8 banks selectable | |||
| Hold input | HOLD A, HOLD B, HOLD RST | ON when connected to GND | ON when connected to 12 to 24V |
| Laser off or measurement value holding (selectable in the menu) | |||
| Zero reset input | ZERO A, ZERO B | ON when connected to GND | ON when connected to 12 to 24V |
| Zero reset of Head A measurement value / Head B measurement value / Calculation value is available | |||
| Optional features | Averaging, Filter mode, Calculation, Holding, Alarming, Controlling output, | ||
| Analog output, Controlling sensitivity, Timer function, Memory function, Bank function, Zero reset | |||
| Display | LCD display | ||
| Protection category | IP20 | ||
| Operation temperature | -10 to 45 (Non condensing) / For storage : -20 to 60 |
||
| Operating humidity | 35 to 85% RH / For storage : 35 to 85% RH | ||
| Vibration resistance | 10 to 55 Hz double amplitude 1.5mm, 2h for XYZ | ||
| Shock resistance | 20G (196m/s2) | ||
| Material | Chassis: Polycarbonate, Connection terminals: Nylon 66 | ||
| Weight | 240g (including connection terminals) | ||
